Construction codes of Ontario

→ View our videos on Tiktok ↓ Code related products on Amazon

2 Pack European Travel Plug Adapter, VYLEE International Travel Adapter with 2 Outlets 4 USB Ports(2 USB C), 6 in 1 Type C Tr...

$25.51

Travel Limit to Exits or Egress Doors for Dwelling Units

Travel Limit to Exits or Egress Doors for Dwelling Units (1) Except as provided in Sentences (2) and (3), every dwelling unit containing more than 1 storey shall have exits or egress doors located so that it shall not be necessary to travel up or down more than 1 storey to reach a level served by, […]

Types of Exits

(1) Except as otherwise provided in this Section, an exit from any floor area shall be one of the following used singly or in combination: (a) an exterior doorway, (b) an exterior passageway, (c) an exterior ramp, (d) an exterior stairway, (e) a fire escape (as described in Subsection 3.4.7.), […]

Vapour Barrier Materials

Vapour Barrier Materials (1) Vapour barriers shall have a permeance not greater than 60 ng/(Pa∙s∙m2), measured in accordance with ASTM E96 / E96M, “Water Vapor Transmission of Materials”, using the desiccant method (dry cup). (2) Where the intended use of the interior space will result in high moisture generation, the assembly shall be designed according to […]

Wall Stud Size and Spacing

Wall Stud Size and Spacing (1) Except as provided in Sentence (2), the size and spacing of studs shall conform to Table 9.23.10.1. (2) Studs for walls not listed in Table 9.23.10.1. and supporting roof loads shall conform to Tables A-30 to A-33, provided, (a) the studs are clad with not less than 9.5 mm thick […]

Wall Studs

Wall Studs (1) Wall studs shall not be notched, drilled or otherwise damaged so that the undamaged portion of the stud is less than two-thirds the depth of the stud if the stud is loadbearing or 40 mm if the stud is non-loadbearing, unless the weakened studs are suitably reinforced. Article 9.23.5.3. Ontario Regulation 332/12 Building […]

Window Installation

Window Installation Windows are usually installed after the house framing and roof covering have been completed. Windows should arrive just in time for installation. If they are delivered early, store them upright in a secure, dry and level area in their original packaging with any temporary bracing left in place. Screens are susceptible to damage […]

Window Performance

Window Performance Several technological advances have vastly improved the performance of windows over the past 20 years. Multiple Glass Layers Condensation on interior window surfaces can be reduced by installing energy-efficient windows, using efficient glazing and low-conductivity frames. Each layer of glass and air space works to increase the inside surface temperature of the innermost […]