Length of Trap Arm (Plumbing)

Length of Trap Arm Table 7.5.6.3. Forming Part of Sentence 7.5.6.3.(4) Table 7.5.6.3. Ontario Regulation 332/12 Building Code,   Information published by oncodes.ca for educational purposes only.
Read more

Light switch with multiple lights wiring diagram

Light switch with multiple lights wiring diagram Oncodes.ca publishes this information for educational purposes only. Please consult your electrician prior to any work and/or have an inspection performed. buildmyowncabin.com Note : Rule 4-022, Installation of identified conductor, to install the identified conductor at each control location of permanently installed luminaire that also includes manual control devices […]
Read more

Light switches with multiple circuits

Light switches with multiple circuits Oncodes.ca publishes this information for educational purposes only. Please consult your electrician prior to any work and/or have an inspection performed. buildmyowncabin.com
Read more

Lighting equipment in damp locations or near grounded metal

Lighting equipment in damp locations or near grounded metal 1) Where luminaires are installed in damp locations or within 2.5 m vertically or 1.5 m horizontally of laundry tubs, plumbing fixtures, steam pipes, or other grounded metal work or grounded surfaces, the luminaires shall be controlled by a wall switch, except as permitted in Subrule […]
Read more

Lighting Outlets in Houses and Dwelling Units

Lighting Outlets in Houses and Dwelling Units (1)  Except as provided in Sentence (2), a lighting outlet with fixture controlled by a wall switch shall be provided in kitchens, bedrooms, living rooms, utility rooms, laundry rooms, dining rooms, bathrooms, water closet rooms, vestibules and hallways in a house or an individual dwelling unit. (2)  Where a receptacle […]
Read more

Location of the Vapour Barrier

Location of the Vapour Barrier To prevent condensation from forming within building envelope assemblies, materials that act as vapour barriers (vapour retarders), including certain types of insulation, must be located within the assembly so that moisture moving from the inside to the outside does not condense and accumulate within the assembly. This means that vapour […]
Read more

Location of Vent Pipes

Location of Vent Pipes (1)  Except as provided in Sentences (2) and (3), a vent pipe that protects a fixture trap shall be located so that,     (a)   the developed length of the trap arm is not less than twice the size of the fixture drain,     (b)   the total fall of the trap arm is […]
Read more