Leading Edges of Treads

(1)  Leading edges of treads that are bevelled or rounded shall,     (a)   not reduce the required tread depth by more than 15 mm, and     (b)   not, in any case, exceed 25 mm horizontally. Article 9.8.4.6 Ontario Regulation 332/12 Building Code,   Information published by oncodes.ca for educational purposes only.
Read more

Length of Fasteners for Gypsum Board

Length of Fasteners for Gypsum Board (1)  The length of fasteners for gypsum board shall conform to Table 9.29.5.5., except that lesser depths of penetration are permitted for assemblies required to have a fire-resistance rating provided it can be shown, on the basis of fire tests, that such depths are adequate for the required rating. Table […]
Read more

Length of Fasteners Gypsum Board

Length of Fasteners Gypsum Board (1)  The length of fasteners for gypsum board shall conform to Table 9.29.5.5., except that lesser depths of penetration are permitted for assemblies required to have a fire-resistance rating provided it can be shown, on the basis of fire tests, that such depths are adequate for the required rating. Article 9.29.5.5. […]
Read more

Length of Trap Arm (Plumbing)

Length of Trap Arm Table 7.5.6.3. Forming Part of Sentence 7.5.6.3.(4) Table 7.5.6.3. Ontario Regulation 332/12 Building Code,   Information published by oncodes.ca for educational purposes only.
Read more

Light switch with multiple lights wiring diagram

Light switch with multiple lights wiring diagram Oncodes.ca publishes this information for educational purposes only. Please consult your electrician prior to any work and/or have an inspection performed. buildmyowncabin.com Note : Rule 4-022, Installation of identified conductor, to install the identified conductor at each control location of permanently installed luminaire that also includes manual control devices […]
Read more

Light switches with multiple circuits

Light switches with multiple circuits Oncodes.ca publishes this information for educational purposes only. Please consult your electrician prior to any work and/or have an inspection performed. buildmyowncabin.com
Read more

Lighting and Ventilation Requirements

Lighting and Ventilation Requirements (1)  Plumbing fixtures shall not be installed in a room that is not lighted and ventilated in accordance with the appropriate requirements in Parts 3 and 9. Article 7.1.6.1 Ontario Regulation 332/12 Building Code,   Information published by oncodes.ca for educational purposes only.
Read more