Construction codes of Ontario

→ View our videos on Tiktok ↓ Code related products on Amazon

Cozy Blue Water Dispenser, Portable Water Bottle Pump for Universal 3, 4 and 5 Gallon with USB Electric Charging and Automati...

$13.00

Identification and Certification Plumbing Component

Identification and Certification Plumbing Component (1) Every length of pipe and every fitting shall have cast, stamped or indelibly marked on it the maker’s name or mark and the weight or class or quality of the product, or it shall be marked in accordance with the relevant standard, and such markings shall be visible after installation. […]

Indoor Design Temperatures

Indoor Design Temperatures (1) At the outside design temperature, required heating facilities shall be capable of maintaining an indoor air temperature of not less than, (a) 22°C in all living spaces, (b) 22°C in unfinished basements, and (c) 15°C in heated crawl spaces. Article 9.33.3.1 Ontario Regulation 332/12 Building Code, Information published […]

Installation of Spray-Applied Polyurethane

Installation of Spray-Applied Polyurethane (1) Spray-applied polyurethane insulation shall be installed in accordance with CAN/ULC-S705.2, “Thermal Insulation – Spray-Applied Rigid Polyurethane Foam, Medium Density – Application”. Article 9.25.2.5. Ontario Regulation 332/12 Building Code, Information published by oncodes.ca for educational purposes only.

Installation of Thermal Insulation

Installation of Thermal Insulation (1) Insulation shall be installed so that there is a reasonably uniform insulating value over the entire face of the insulated area. (2) Insulation shall be applied to the full width and length of the space between furring or framing. (3) Except where the insulation provides the principal resistance to air leakage, […]

Installation of Vapour Barriers

Installation of Vapour Barriers (1) Products installed to function as the vapour barrier shall protect the warm side of wall, ceiling and floor assemblies. (2) Where different products are used for the vapour barrier and the insulation, the vapour barrier shall be installed sufficiently close to the warm side of the insulation to prevent condensation at design […]

Insulating Concrete Form Foundations

Insulating Concrete Form Foundations Insulating concrete form (ICF) walls are concrete walls cast in polystyrene forms that remain in place after the concrete has cured (Figure 17). Most ICF walls are “flat” ICF walls, which means that the concrete is of uniform thickness over the width and height of the wall. The NBC requires that […]

Insulation of Ducts Carrying Outdoor Air

Insulation of Ducts Carrying Outdoor Air Table 9.32.3.10.A. Forming Part of Sentence 9.32.3.10.(4) Table 9.32.3.10.A. Ontario Regulation 332/12 Building Code, Information published by oncodes.ca for educational purposes only.