(1) Cavity walls shall be made with not less than 90 mm wide units if the joints are raked and not less than 75 mm wide units if the joints are not raked.
(2) The width of a cavity in a cavity wall shall be not less than 50 mm and not greater than 150 mm.
(3) The minimum thickness of cavity walls above the supporting base shall be 230 mm for the top 7.6 m and 330 mm for the remaining portion, except that where 75 mm wide units are used, the wall height above the top of the foundation wall shall not exceed 6 m.
Article 9.20.6.2. Ontario Regulation 332/12 Building Code, Information published by oncodes.ca for educational purposes only.