/  / ◄... / Hardboard Cladding Material Standards

Hardboard Cladding Material Standards

(1)  Factory-finished hardboard cladding shall conform to CAN/CGSB-11.5M, “Hardboard, Precoated, Factory-Finished, for Exterior Cladding”.

(2)  Hardboard cladding that is not factory finished shall conform to Types 1, 2 or 5 in CAN/CGSB-11.3-M, “Hardboard”.

Article 9.27.9.1. Ontario Regulation 332/12 Building Code, Information published by oncodes.ca for educational purposes only

Similar articles

  1. Masonry Units
  2. End Bearing Length of Joists and Rafters
  3. Foundations for Decks and Concrete Steps
  4. Maximum Spans for Douglas Fir – Larch Lintels – No. 1 or No. 2 Grade – Non-Structural Sheathing(1)