/  / ◄... / EIFS Design and Installation

EIFS Design and Installation

(1)  The design of an exterior insulation finish system shall comply with CAN/ULC-S716.3, “Exterior Insulation and Finish Systems (EIFS) – Design Application”.

(2)  The installation of an exterior insulation finish system shall comply with CAN/ULC-S716.2, “Exterior Insulation and Finish Systems (EIFS) – Installation of EIFS Components and Water Resistive Barrier”.

Article 9.27.13.3. Ontario Regulation 332/12 Building Code, Information published by oncodes.ca for educational purposes only

Note : Image shown as an example only and not part of this article.

Example of Exterior Insulation and Finish Systems (EIFS) installation method

Similar articles

  1. Masonry Units
  2. End Bearing Length of Joists and Rafters
  3. Foundations for Decks and Concrete Steps
  4. Maximum Spans for Douglas Fir – Larch Lintels – No. 1 or No. 2 Grade – Non-Structural Sheathing(1)